Zing MPS TT is a multi-position stander that can transition from flat to load, upright and prone in one motion.No transfers, flipping of foot plates, pads or trays are required to go from supine to prone. It is also one of the only standing devices that offers up to 30 degrees (60 degrees bi-lateral) of independent leg abduction. No other multi-position stander is as easy as the Zing MPS TT.
Size 1 fits: children from infancy up to 44” and up to 70 lbs.
The Zing MPS TT is a multi-position stander that can seamlessly transition from flat to load, upright and prone in one motion. No transfers, flipping of foot plates, pads or trays are required to go from supine to prone. It is also one of the only standing devices that offers up to 30 degrees (60 degrees bi-lateral) of independent leg abduction. No other multi-position stander is as easy to position as the Zing MPS TT.
The EasyStand Zing Multi-Position Stander (MPS) Tilt Table is a pediatric stander that allows a child to seamlessly go from a full supine to prone position without having to change, turn or flip pads and foot plates or transfer a child in and out of the stander. In one fluid motion, the child can be positioned between supine, upright and prone positions. It differs from the Zing MPS only in the type of main support padding, which is larger and has the option of additional padded strapping or individual positioning components – this can be an easier and quicker transfer in and out of the stander.
But the EasyStand Zing’s advantages aren’t limited to its groundbreaking frame design, it’s the options that further set it apart from all other pediatric standers. Leg abduction up to 30 degrees in each leg is possible, multi-adjustable tray is angle adjustable and swings away both to the left and right while still remaining attached to the frame. Leg length discrepancies and hip and knee contractures are accommodated with multi-adjustable foot plates, independent adjustable calf pads and multi-adjustable knee pads. The Zing MPS, Supine, MPS TT, Supine TT standers all have a very comfortable flat to load transfer height of 32″
The modular design of the EasyStand Zing helps ensure the correct stander is ordered for each child. Tool free adjustments make standing in the Zing easier, which often leads to increased standing program compliance. The Zing MPS size 1 has a terrific user range, fitting most children from infancy to 44” and up to 70 lbs.
four locking swivel casters
foot operated gas spring
mast receiver with prone position lockout
Transfer Height (Horizontal Position)
Pelvic Support to Foot Plate Range
Upper Body Support Height Range
Kneepad Depth Range
Kneepad Inside Width (extra small)
Kneepad Inside Width (small)
Kneepad Dimensions (extra small)
Kneepad Dimensions (small)
Kneepad Height Range
Multi-Adjustable Kneepads Width Range (extra small)
Multi-Adjustable Kneepads Width Range (small)
Multi-Adjustable Kneepads Height Range
Weight of basic unit
Frame Footprint – Caster-to-Caster
Frame Footprint – Maximum Dimensions
Black nylon/Neoprene or Molded Urethane
Green, Purple, White, or Orange
Casters and Wheels Diameter
Dual Control or Lockout Knob
30° per side
Foot Straps, extra small – fits foot height of
Foot Straps, small – fits foot height of
Secure Foot Straps – fits foot height of
Foot Plate Size 6″Lx3″W
Foot Plate Size 7.75″Lx3.25″W
Foot Plate Size 9.75″Lx4″W
Foot Plate Platform
Multi-Adjustable Foot Plates – Plantar/Dorsi
Multi-Adjustable Foot Plates – Fore/Aft
Multi-Adjustable Foot Plates Rotation
Shadow Tray Size
Shadow Tray Height Range
Shadow Tray Fore/Aft Range
Swing-Away Tray Size
Swing-Away Tray Height Range
Swing-Away Tray Fore/Aft Range
Swing-Away Tray Angle Adjust Range
40° inclines to -90°
Hip Support Pad Size
Hip Supports Width Range
Lateral Support Pad Size
Lateral Supports Width Range
Lateral Supports Height Range
Lateral Supports Fore/Aft Range
Planar Pelvic Support Pad 5×7″
Planar Pelvic Support Pad 5×9″
Form to Fit Pelvic Support Pad 5×7″
Form to Fit Pelvic Support Pad 5×9″
Planar Upper Body Support Pad 5×7″
Planar Upper Body Support Pad 5×9″
Form to Fit Upper Body Support Pad 5×7″
Form to Fit Upper Body Support Pad 5×9″
Chest Strap (Pad Size)
Chest Strap – User Circumference
Up to approx 24″
Up to approx 61cm
X-Style Chest Vest – Extra Small
X-Style Chest Vest – Small
Head Support – Height Range
Head Support – Depth Range
-2.5″ to +1.5″
-6 to +4cm
Head Support Cushion Size – Extra Small
Head Support Cushion Size – Small
Positioning Belt – Hip Circumference
Up to approx. 24″
Up to approx. 61cm
Mast is the base for positioning options including foot plates, knee supports, pelvic supports, upper body supports and head supports.
Mast is the base for support and positioning components and allow for 0-30º of independent leg abduction.
Allows both foot and hand control of the gas spring lift. Must order Push Handle PA5594.
Gas Spring Lift Lockout
Locks gas spring in any position from lying down to fully upright and prone positions.
Makes pushing the stander easier for the caregiver and also aids in lifting and lowering the child.
Great for transporting stander. Directionally locks one caster while leaving the other three free to swivel.
Platform Foot Plate
Adjustable in height. Foot holders and foot straps can be added for more positioning of the feet.
Adjustable Foot Plates
Foot plates are adjustable forward/aft /- .75” extra 1.5″ , plantar/dorsi /- 20°, toe-in/toe-out, swivel 30° left/right, in addition to height. Two sizes.
Foot Holders for Platform Foot Plate
Use with the Platform Foot Plate, gives added positioning of users feet. Three sizes.
Foot Holders for Platform Foot Plate
Use with the Platform Foot Plate, gives added positioning of users feet.
Secure Ankle/Foot Straps
Velcro® and D-ring adjustment holds feet securely in place at ankle and toes with multiple attachment slots for proper foot positioning.
Velcro® and D-ring adjustment holds feet in alignment with multiple attachment slots for proper foot positioning. Straps measured in length over top of foot, with approximately 1.5″ of Velco® overlap.
Leg Support Planar Pads
Cushioned Neoprene® pad for leg support.
Calf Pad with Knee Strap
Gives support from the back of the calf. Adjustable in height and fore/aft. Not available with PA5532 Mast with Leg Abduction.
Multi-Adjustable Knee Pads
Multi-Adjustable knee pads are adjustable in swivel, height /-.75″ (2cm), width 4″-9″ (10-23cm), in addition to depth range of 5″ (13cm).
Multi-Adjustable Calf Pads
Great for adapting to knee contractures. Gives support from the back of the calf. Adjustable up and down with knee pad and for/aft 4″ independently.
Cushioned pad covered with Neoprene®.
Form to Fit Pelvic Support Pad
Form to Fit Pad with built in hip support that can be custom fitted to the user.
Pelvic Support Accessories
Hip Supports for Planar Pads
Keeps the hips in symmetrical alignment. Adjustable from 6″-10″ (15-25cm) with for/aft 4″ (10cm). Pad size is 3.5″x3.5″ (9x9cm). Not available with Form to Fit pad.
2″ (5cm) wide belt has a D-Ring Velcro closure, provides hip stability for user. Fits hip circumference up to 24″ (61cm).
Padded Positioning Strap
5″x8″ (13x20cm) pad attached to a 2″ (5cm) belt. Fits hip circumference up to 24″ (61cm).
Upper Body Support
Cushioned pad covered with Neoprene®.
Form to Fit Upper Body Pad
Form to Fit Pad with built in lateral support that can be custom fitted to the user.
Keeps the upper torso in symmetrical alignment. Not available with Form to Fit upper body support.
Lateral Supports with Elbow Stop
Lateral Supports with Elbow Stop works as a lateral support and elbow rest. Great for the supine position. Not available with Form to Fit upper body support.
Lateral Supports with Elbow Stop and Arm Rest
Lateral Supports with Elbow Stop and Arm Rest works as a lateral support, elbow rest and armrest. Great for the supine, upright and prone position. Not available with Form to Fit upper body support.
Elbow Stop with Arm Rest
Elbow Stop with Arm Rest is great for loading and bringing to upright. Works with both planar and form to fit upper body supports. For planar and form to fit pads.
X-Style Chest Vest
Neoprene® with camlock adjustment provides anterior trunk support for child.
Form to fit Head support for Zing MPS
Head support for Zing MPS
Headrest Mounting Bracket
For use when mounting an after market head support.
Black or clear molded tray is accessible in all positions and provides anterior support as user moves from supine to upright and prone positions. Adjustable in depth and height.
Tray Forearm Wings
Black or clear molded tray forearm wings. Wings give additional area to rest arms when in standing position. Not available with Mobile option.
Hand Grips for Clear Tray
Hand Grips provide additional arm and hand support and alignment. Easily movable for precise arm positioning. Attaches with suction cups. A clear acrylic tray is required.
Tool Pouch holds the assembly tools provided with the stander. Attaches to unit with Velcro® straps. Tools not included.