The ProSeries 1412 has a fixed drive that helps children who might otherwise have problems making a full pedal rotation. The foot crank is constantly in motion for full therapeutic effect. Coasting is not possible with a fixed drive; when limb motion stops, the bike does as well. ProSeries 1412 can be adapted with a wide variety of seating options and accessories—helping rider feel safe and secure. Available in Amtryke red. Assembly required.
- 12 inch front and rear wheels with pneumatic tires
- Rolled steel frame features hand-ratcheting levers which allow the sliding seat post to move closer or further from the front to accommodate a variety of rider sizes
- Seating removes from frame for easy transport
- Low center of gravity provides added stability
- Fixed drive helps children make a full pedal rotation
- Quick-release cam levers for easy handlebar adjustment
- Safety steering limiter pin for three graduated steering options: straight, 20-degrees left/right, free steering
- Self-righting pedals with footplate, heel trap and straps over instep and toe
- Saddle seat with lap strap and 1600 simple seat back with chest strap
- Four-way adjustable seating: up/down and forward/back
- Loading brake for easy rider transfer
- Steel wire basket
- Safety helmet
- Leg Length: 21-26 in.
- Arm Length: 14-22 in.
- Height: 36-42 in.
- Max weight: 125 lbs.
Measuring Tips: The leg measurement is on the outside of the leg (not the inseam), from the hip joint to the floor—with the shoe on.
If you have trouble finding the hip joint, ask the rider to squat a bit or sit down. The fold between the torso and the leg is the point to measure.
For the arm measurement, by “digit crease” we mean the first set of knuckles (ones closest to rider’s torso).
Measure both arms and also both legs, there may be a difference. If there is, use the shorter measurement.
Snappy Seat System
Snappy Seat System, padded, and adjustable and is the standard seating on the Snappy. The snappy seat provides trunk support for the smallest riders. The snappy seating system is made up of 2 parts. The bottom base seat cushion is 8 inches wide by 10 inches deep. The 2nd part of the seat is the contoured padded back and head support. The head support can be raised up and down. The padded back/head support can be easily adjusted at any position along the 10 inch bottom base seat cushion.
Full Padded Seat Back
The full padded back provides additional trunk support for riders with low muscle tone. Replaces the small padded seat back that is standard on the Seat Back system. Comes with brackets for mounting the lateral supports and/or optional H-Harness. Measures 10 inches wide by 15 inches tall.
Molded Plastic Bucket Seat.
Skinny Saddle Seat
The Skinny Saddle Seat is much like a traditional seat found on road bikes. It is a perfect option for riders who need added space for legs and knees while pedaling.
Pommel Saddle Seat
These highly contoured seats feature high sides and a built-in pommel. Helps prevent hip sublimation; promotes knee separation and a feeling of security. Much softer than a standard saddle seat. Medium pommel saddle seat measures 11.5" inches wide by 10.5" inches deep with a 3" inch pommel. Large size measures: 14 inches wide by 13 inches deep with a 3 inch pommel.
Seat Back System
The Seat Back System is a versatile seat back that uses a double tube support system. The padded back measures 8 inches wide by 10 inches tall and can be adusted by large knobs up/down the double tube. Quick release cam lock levers allow the 2 removable padded lateral supports adjustments up/down, forward/back and swing in/out. A strap secures lateral supports in front of rider. Features built in push grip for caregiver or parent. The 1400 seat back system can be adapted with other accessories to provide more trunk support. This seat back system does not include a seat but can be used in conjunction with a saddle seat, bench seat, and tractor saddle seat.
This adjustable pad provides additional support for the 1400 Seat Back System. The pad measures 9 inches wide by 4 inches tall. It can be positioned below the standard seat back pad as a lumbar support or on top of the standard seat back pad as a head pad. The pad can be adjusted up/down the double tube supports and can also be adjusted forward/back.
This contoured head rest is easy to mount and easy to adjust. The head rest can be adjusted up/down and forward/back for optimal positioning.
Wrist Wraps Available in 4 sizes
Size Range: XSmall - Large. Includes one pair. Wrist wraps help maintain riders hold on hand grip. Pair of soft washable cloth wraps secure around wrist with hook and loop closure. Sizes are determined by the measurement from A. top side of wrist around hand to the B: bottom side of wrist.
Wrist Brace Holding Mitt Available in 5 Size
XXS, XS, S, M, XL - [Large has been discontinued]. Size is Wrist Circumference. This is a combination of a wrist brace and a holding mitt. The wrist brace holding mitt helps maintain hold on the handgrip while providing wrist stability. Durable padded material for maximum wear and comfort. Measurement is wrist circumference.
Knee Adductor Positioning Strap
Hook and loop strap designed for riders who need help keeping their legs in proper alignment over the pedals. Available in 3 sizes: small, medium, large. Sizing is the circumference of the thigh just above the knee. The Size is based on the leg circumference just above the knee.
Rear Steering Kit
Safety Flag with Amtryke Logo and Bracket
Orange flag with logo and 2 piece vertical rod and black plastic mounting grommet for use on Amtrykes models.
License Plate with red letter Decals. Personalize your tryke with a license plate.
10 oz Water Bottle with Holder
10 oz Water bottle with Holder. This can be mounted on any section of tubing 3 inches in circumference of smaller. The 10oz water bottle comes with a rubber cage to attach it