Med-Lift 5420 Wall-a-Way Reclining Lift Chair is one of the new additions to their line of reclining lift chairs. Featuring decorative nail head arm trim. Its wall away feature is designed so that this chair can be placed within 3" of a wall when the chair is in the fully reclined positions. It features an assortment of positions, including the "TV viewing" position, to ensure maximum comfort.
The frame of the chair is all kiln-dried hardwood; and all stress points are kiln-dried oak. All joints are glued and connected with steel fasteners. Uni-construction of seat-back assembly is independently lab-tested for strength and durability. Gang nails are used at all other critical joints or stress points. All bolts used are Grade 5 (Medlift is the only lift chair mfr. using this grade of bolt). All bolts go entirely through the wood; no lag screws are used to secure the mechanism. The mechanism is secured by special locking T-Nuts to ensure that the mechanism stays tight throughout the lifetime of the chair. All critical connection points for the reclining hardware, etc., have a double locking nut of the highest aircraft grade quality. All wood screws used are the strongest available. Corner blocks are used throughout the chair at all critical points for added strength. An extra rail is used across the top of the seat back to ensure that the back stays straight and square.
All seat springs used are 9 gauge Morley system no-sag springs that are tied together with tie wire to make every spring work together as a seat unit. Seat spring are correctly spaced on the spring rails by a special clip rail machine. The front seat rail on the frame is larger and thicker than most competitors' products, which makes the seat much stronger and durable. There is also a retainer rail secured by steel brads on top of the seat springs to ensure that they do not loosen. The back springs are 12 gauge, and are also tied together with special tie wire for more comfort and endurance. To ensure that the seat springs do not cut into the bottom of the seat foam, we use a nova bond pad. The fiber used in the backs is a dustless, odorless, non-allergenic, conjugated fiber, which is the best we can find in the industry. This feature makes the backs retain their original shape, while also offering greater comfort.
- Made in the USA.
- Coil Seat
- Fiber Filled Back
- High density Foam Seating
- Weight Capacity: 375 Pounds.
- Decorative Nail Head trimming
- Assorted Fabrics
- Overall: 42.5" H x 39.5" W x 44.5" D
- Seat: 20.5" H x 22" W x 21.5" D
- Back: 27" H
- Fully Reclined: 76.5" D
- Arms: 8" H
- Tip of the footrest to the back of the seat: 40"
- Recommended height range: 5' 6" to 6' 2"
- Overall Product Weight: 170 lbs
- This chair carries a complete two (4) year warranty against manufacturer's defects and workmanship.